3rd Shift Production Operator
Quick Apply Full-time 39 minutes ago Full Job Description RLS Rapid Locking System, The original, patented, proven flame-free press fittings for high-pressure HVAC and refrigeration applications.
RLS LLC is part of Marmon Holdings, Inc.
, a Berkshire Hathaway company.
Marmon is a global industrial organization comprising 11 diverse business sectors and more than 125 autonomous manufacturing and service businesses.
Come Join a Team where People make the Difference in our New State-of- the-Art facility located in Hazelwood, MO.
3rd Shift Production Operator Position
Summary:
General operation of all RLS equipment/processes, Monitor RLS parts for appearance and ensure that all parts meet specifications to company standards.
Use measuring instruments to ensure quality standards.
Meet production rates set forth by the company and document all production totals, run rates and measurements onto controlled documents.
1.
Major
Responsibilities:
Essential functions include but are not limited to the following functions:
a.
Operators rotate every 2 hours to reduce strain of repetition during a 8 hour shift.
b.
OMS-monitor machine operation and part specifications to company standards, move totes of cut product to next process staging, track piece rate hourly, total parts produced and record onto visual management boards.
c.
Bender-load hopper and start, monitor the auto load hopper and fill when needed, track part specification and hourly rates, total parts produced and record onto visual management boards.
move completed totes to next process staging d.
Cup and Trim-load 1 90 degree elbow in to die, cycle machine.
When cycle is finished remove trimmed part making sure trim rings are blown off tooling, reload die and repeat cycle.
Monitor hourly rate total parts produced and record onto visual management boards.
Move completed totes to next process staging.
e.
HydroForm- load 2 parts into the dies and cycle machine, remove formed parts at cycle end, reload dies and cycle.
Blow off emulsion, inspect parts and place into tote.
Monitor part specs, total parts produced and hourly rates and record onto visual management boards.
Move completed totes to next process staging.
f.
SpinForm- insert part over spin tooling thru guard, cycle machine using foot switch.
At cycle end rotate part 108 degrees and repeat.
Place formed part into tote for next process.
Monitor part specs and hourly rates, total parts produced and record onto visual management boards.
Move completed totes to next process staging.
g.
Inspect- place part on to view screen, cycle instant measurement machine.
At cycle end screen will indicate a good or bad part.
Keep good parts separate from scrap parts.
Track piece rate hourly, total parts produced and record onto visual management boards.
Move completed totes to next process staging.
h.
Etch- place inspected parts on to etch stands, insert stands into cabinet against the stop rails, close door and cycle.
At cycle end inspect laser etch and place in to metal basket.
Full baskets are to be placed on pallet to be annealed.
Track piece rate hourly, total parts produced and record onto visual management boards.
i.
O-ring- place correct size o-ring on to inserter press footswitch to hold o-ring into place, place annealed part over inserter tip and push footswitch to install o-ring, repeat process on the other end of the part, repeat again if you are o-ringing tee's.
Track piece rate hourly, total parts produced and record onto visual management boards.
Move completed totes to next process staging.
2.
Supervisory
Responsibilities:
N/A 3.
Working Conditions/Physical Requirements:
a.
Must be able to stand for extended periods of time, normal manual dexterity, vision and color acuity.
Job Type:
Full-time Pay:
$18.
00 per hour
Benefits:
401(k) 401(k) matching Dental insurance Employee assistance program Employee discount Flexible spending account Health insurance Health savings account Life insurance Paid time off Parental leave Professional development assistance Retirement plan Vision insurance Schedule:
8 hour shift Day shift Monday to Friday Night shift Weekend availability Ability to commute/relocate:
Hazelwood, MO 63042:
Reliably commute or planning to relocate before starting work (Required)
Experience:
Manufacturing:
2 years (Required) Shift availability:
Overnight Shift (Required) Work Location:
One location Quick Apply.
Estimated Salary: $20 to $28 per hour based on qualifications.
RLS LLC is part of Marmon Holdings, Inc.
, a Berkshire Hathaway company.
Marmon is a global industrial organization comprising 11 diverse business sectors and more than 125 autonomous manufacturing and service businesses.
Come Join a Team where People make the Difference in our New State-of- the-Art facility located in Hazelwood, MO.
3rd Shift Production Operator Position
Summary:
General operation of all RLS equipment/processes, Monitor RLS parts for appearance and ensure that all parts meet specifications to company standards.
Use measuring instruments to ensure quality standards.
Meet production rates set forth by the company and document all production totals, run rates and measurements onto controlled documents.
1.
Major
Responsibilities:
Essential functions include but are not limited to the following functions:
a.
Operators rotate every 2 hours to reduce strain of repetition during a 8 hour shift.
b.
OMS-monitor machine operation and part specifications to company standards, move totes of cut product to next process staging, track piece rate hourly, total parts produced and record onto visual management boards.
c.
Bender-load hopper and start, monitor the auto load hopper and fill when needed, track part specification and hourly rates, total parts produced and record onto visual management boards.
move completed totes to next process staging d.
Cup and Trim-load 1 90 degree elbow in to die, cycle machine.
When cycle is finished remove trimmed part making sure trim rings are blown off tooling, reload die and repeat cycle.
Monitor hourly rate total parts produced and record onto visual management boards.
Move completed totes to next process staging.
e.
HydroForm- load 2 parts into the dies and cycle machine, remove formed parts at cycle end, reload dies and cycle.
Blow off emulsion, inspect parts and place into tote.
Monitor part specs, total parts produced and hourly rates and record onto visual management boards.
Move completed totes to next process staging.
f.
SpinForm- insert part over spin tooling thru guard, cycle machine using foot switch.
At cycle end rotate part 108 degrees and repeat.
Place formed part into tote for next process.
Monitor part specs and hourly rates, total parts produced and record onto visual management boards.
Move completed totes to next process staging.
g.
Inspect- place part on to view screen, cycle instant measurement machine.
At cycle end screen will indicate a good or bad part.
Keep good parts separate from scrap parts.
Track piece rate hourly, total parts produced and record onto visual management boards.
Move completed totes to next process staging.
h.
Etch- place inspected parts on to etch stands, insert stands into cabinet against the stop rails, close door and cycle.
At cycle end inspect laser etch and place in to metal basket.
Full baskets are to be placed on pallet to be annealed.
Track piece rate hourly, total parts produced and record onto visual management boards.
i.
O-ring- place correct size o-ring on to inserter press footswitch to hold o-ring into place, place annealed part over inserter tip and push footswitch to install o-ring, repeat process on the other end of the part, repeat again if you are o-ringing tee's.
Track piece rate hourly, total parts produced and record onto visual management boards.
Move completed totes to next process staging.
2.
Supervisory
Responsibilities:
N/A 3.
Working Conditions/Physical Requirements:
a.
Must be able to stand for extended periods of time, normal manual dexterity, vision and color acuity.
Job Type:
Full-time Pay:
$18.
00 per hour
Benefits:
401(k) 401(k) matching Dental insurance Employee assistance program Employee discount Flexible spending account Health insurance Health savings account Life insurance Paid time off Parental leave Professional development assistance Retirement plan Vision insurance Schedule:
8 hour shift Day shift Monday to Friday Night shift Weekend availability Ability to commute/relocate:
Hazelwood, MO 63042:
Reliably commute or planning to relocate before starting work (Required)
Experience:
Manufacturing:
2 years (Required) Shift availability:
Overnight Shift (Required) Work Location:
One location Quick Apply.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
